GL1800 Middle

This custom designed upper wind deflector incorporates its own movable vent panel that can direct wind into the rider pocket. These upper panels dramatically widen the air protection pocket by approximately 4" on each side. No drill installation.

This custom designed lower wind deflector is contoured to minimize the wind flow close to the rider, or can be easily pivoted to direct air in front of the rider. No drill installation, mounts with our own die-cast mounting brackets.

Tri-chromed ABS. This is a beautiful addition to your bike.

GL1800 Goldwing 2001-2005

These tri-chromed grills are perfectly contoured to the the outline of the speakers. Apply with self-adhesive tape. Fits 2001-2005. Pairs.

The Front Speaker Top Trim for the GL1800 is a part that will give your dash a blast of sizzling style that you can see every time you ride. This perfectly sized accent adds much needed chrome to your dash with minimal effort. Installs in seconds & goes great with all Küryakyn cockpit accessories.

Fits:  All ’06-’10 GL1800 Models

This tri-chromed accent fits all GL800s. It easily fits over the left CB controller adding a nice chrome finish.

These cast levers replace the OEM black levers to add a beautiful accent to the GL1800 handlebar area. 

Fits Honda GL1800 Gold Wing 2001-2010

Billet aluminum handlebar riser shims mount between the handlebars and the forks to raise the handlebars about 1-1/2" at the grip end (pair).

Fits Honda GL1800 Gold Wing.

Chrome dampeners with carbon fiber insert.

Fits Honda GL1800 Gold Wing (pair).

Now you can have the luxurious feel and custom look of our ISO-Grips without losing the heat! This clamshell design attaches right over your stock grips allowing the heat to come through.

Fits GL1800 2006 onwards fitted with standard heated grips.

Heated Grips are a perfect way to keep your hands warm while riding during cold weather conditions. Comfortable,warm, durable non-slip grips allow the rider to vary the degree of warmth with the variable position Hi/Med/Lo/Off rheostat switch.

Added to the popular Kuryakyn ISO™-Grips, this little jewel can make all the difference in the world on a long ride. The Throttle Boss™ is a small adjustable paddle that is positioned under the palm of one's throttle hand. This allows the driver to slightly relax the grip on the gas and still maintain a constant speed. Muscle stiffness and fatigue are reduced after prolonged cruising at a steady pace. A new redesigned rubber pad permits use on both grips for a matched set.

Aluminum die-cast in a classic design.

Show Chrome finish in teardrop design. (pair)

Fits Honda Gold Wing GL1800.

In the popular Free Spirit design. (pair)

Fits Honda Gold Wing GL1800.

Fits all GL1500/GL1800

ABS chrome easily adjustable upper air vents to replace OEM black ones. Easily snap into place. (pair)

These chromed ABS Air Vents replace the stock OEM black vents. The air vents are easy to adjust and easily snap into place.

These chrome ABS dash door accents are really great looking and compliment the bike so much with all the other chrome accents. They fit all year bikes of the GL1800. This set includes a right and left chrome trim and a chrome accent to cover the latch for a complete look. They are easy to install using the silcone included

Stamped steel chrome accent to dress up the area around the left side controls. Attaches with double sided tape provided.

Fits Honda GL1800 Gold Wing non airbag model.

Stamped steel chrome accent piece for the right side control area. Attaches with double sided tape.

Fits the GL1800 Gold Wing except GPS version

Stamped steel chrome accent piece for the right side control area. Attaches with double sided tape.

Fits the GL1800 Gold Wing with GPS system.

This stamped steel accent is designed to fit around the radio panel buttons to dress up the console area.

Fits Honda GL1800 Gold Wing

A pair of chrome radio knobs to replace the OEM black volume and mode controls. Easily snap into place for a secure fit.  Reuses OEM clips to hold knobs.

Fits Honda GL1800 Gold Wing.

Show Chrome quality stamped steel accent easily mounts with double sided tape.

Chromed ABS stamped steel accent easily mounts with double sided tape to the fuel door.

This accessory light kit fits on the right side control panel or any flat surface on any bike. The four lighted switches let you know what accessories are on or off. Includes: chrome panel with cut outs, wire harness and lighted switches

This accessory light kit fits on the right side control panel or any flat surface on any bike. The three lighted switches and a voltmeter let you know what accessories are on or off and how much power is being used. Includes: chrome panel, wire harness and lighted switches. Drilling required.

This pair of scuff pads adds an unique element to the bike with their carbon fiber look. They attach with 3M adhesive backing to the tank or other areas of the GL1800, GL1500, Sport bikes etc. Measures 12-3/4" long x 4-3/4" high.

These pads easily add a unique element to the GL 1800 with our popular carbon fiber look.  They help shield the bike's finish from scratches and scuffs.  Create an even more unique look by pairing them with out Tank Scuff Pads, item 52-720.  They easily attach with included 3M adhesive backing to engine cover.  Measure 8-1/2" long X 3-1/4" wide.   Come as pair

For an easy and economical way to improve function and style on your bike, add our Brake Pedal and Arm Cover. The Brake Pedal Cover installs directly over your stock pedal, while the second cover goes directly over the stock arm to completely chrome this area. A simple yet cool upgrade to your stock parts.

A great-looking replacement for the stock painted footpeg mounts.

Put your feet in a more comfortable position, update foot controls, and improve the look of your bike, all at one time. Our new Driver Floorboard Kit includes a built-in heel-toe shifter and a brake lever for the ultimate in comfort and convenience. The latest addition to Kuryakyn's exclusive ISO™ family, our finely chromed driver boards have cushy, full-length ISO™ rubber inserts to absorb vibration. The boards fold up for easy maneuvering in tight spaces. The kit installs in minutes.

GL1800 Goldwing 2001-2010
 

We understand that while a lot of riders may want the convenience of a heel-toe shifter, not everyone wants to convert to floorboards. This simple kit installs in minutes and retains the stock footpegs. 

GL1800 Goldwing 2001-2010

Ergo II Cruise Mounts are undeniably the best highway peg available for the GL1800. The sturdy two-piece clamp assembly is easily installed and locates the swingarm mounting point high and tight for excellent cornering clearance. Offered with numerous footrest options and providing a wide range of adjustability, the Ergo II is sure to please.

GL1800 Goldwing 2001-2010

Ergo II Cruise Mounts are undeniably the best highway peg available for the GL1800. The sturdy two-piece clamp assembly is easily installed and locates the swingarm mounting point high and tight for excellent cornering clearance. Offered with numerous footrest options and providing a wide range of adjustability, the Ergo II is sure to please.

GL1800 Goldwing 2001-2010

Replace OEM kickstand with the Cruis Wing™ Series kickstand. Larger base promises more stability in rest position.

Fits Honda GL1800 Gold Wing.

Genuine Honda accessory - hand-polished, double-nickle chrome plate

Believe it or not, the perfect kickstand is one of the most difficult products to engineer. It must have super strength, resist sinking into warm blacktop, and have great looks. It also needs to be compatible with driver floorboards and other aftermarket accessories so you can easily access and extend it. We are pleased to be able to offer you a beautifully chromed stand that works perfectly with our state-of-the-art floorboards and shifter and most other accessories you may desire.

An alternative to the all chrome look. This piece combines chrome and raised rubber inserts to replace the gray plastic OEM swing arm cover and all the way up the frame. Attaches with existing hardware

Fits GL1800 all models

This tri-chromed ABS from piece replaces the dull gray areas of the pivot and frame making one complete smooth chrome accent. Included are round rubber inserts (45-1606R) to protect the chrome. Sold in pairs.

This accent piece is as beautiful as it is practical and it is a great chrome addition to any GL1800. Made to fit around the “Goldwing” emblem. Fits all GL1800s. Goes on with self-adhesive tape. Sold in pairs..

ABS chrome with contrasting raised black rubber inserts. Mounts with existing screws. These covers coordinate beautifully with our Chrome & Rubber Frame Covers. Fits Honda GL1800 Gold Wing.

The chromed ABS Battery Side Cover Trim replaces the stock OEM black plastic trim on GL1800. Mounts with existing hardware.

Protects saddlebags from passenger footwear while providing a unique and stylish look. Chrome plated steel scuff plates come as a 4 piece set and attach with double sided tape provided

Armrest/Backrest Combo incorporates a smaller contoured driver backrest using materials and designs to match the OEM look. A new design innovation is the sleek single mounting bracket which allows for easier installation of both the backrest and the armrests.

Fits all GL1800

These passenger foot pegs have a two position to provide a more comfortable ride. Tri-chromed. Sold in pairs.

Fits Honda GL1800 Gold Wing.

Steel plates mount into the stock holes enabling the OEM passenger floorboards to be relocated into one of 10 positions easily without removal of bolts. Allows boards to be raised 3-5/8" higher and positioned 1-1/2" further forward of OEM position.

Fits Honda GL1800 Gold Wing.

Replaces the gray OEM trim pieces along the side of the passenger floorboards of GL1800 (pair).

Roomy main zippered compartment with a handy utility pouch on top. Additional drop down pocket makes this piece a storage must have.

Designed with clear pouch (6" x 3" x 1") to accommodate and provide access to various PDA, MP3 and other electronic devices.

Pocket is hinged for easy access.

Pocket is hinged for easy access.

Made of marine grade vinyl with non-marring back and UV proof clear plastic. Securely mounts around the yoke with its own Velcro®, easy removable strap. Velcro at top easily allows full unrestricted access to audio cluster.

Fits Gold Wing GL1800.

Five piece set, Honda OEM match. Two ovals, two rounds and one slotted. Can be used as grommet replacement on GL1800 Gold Wing.